manualshive.com logo in svg

Kinova Gen3, User Manual

Share
Download
Kinova Gen3 User Manual Download Page 16

KINOVA

®

 

Gen3 Ultra lightweight robot 

User Guide

16

 Normal use definition

This section describes the normal use of the robot.

The definition of 

normal use

 includes lifting, pushing, pulling, or manipulating (without a gripper

or other end effector attached) a maximum load of:

• mid-range, continuous: 4 kg
• full-reach, temporary: 4.5 kg
• full-reach, continuous 1.1 kg

The robot is designed to hold, move, and manipulate objects in the user environment. However,

 

for some loads in certain positions (near maximum load and reach), holding an object for an

 

extended period of time may result in heating. To protect the robot hardware from excessive

 

heat, safety thresholds shut down the robot if the temperature rises above a certain threshold.

Before this is reached, an API notifcation will be rendered as a user alert on the KINOVA

®

KORTEX™ 

Web App

.

The robot includes a number of temperature-related safeties:

• base - CPU core and ambient temperatures
• actuators - CPU core and motor temperatures
• interface module - CPU core and gripper motor temperatures

If you receive any temperature warnings, put down any object as soon as is practical and place
the robot into a stable rest position to allow it to cool down.

During normal operation, the robot joints are subject to heating. The joints are normally
covered in plastic rings to protect the user from the metal surfaces which may become hot.

Summary of Contents for Gen3





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands