manualshive.com logo in svg

Kinova Gen3, User Manual

Share
Download
Kinova Gen3 User Manual Download Page 142

KINOVA

®

 Gen3 Ultra lightweight robot 

User Guide

142

 Maintenance

This section describes maintenance tasks for the robot.

Maintenance overview

Currently, none of the components of the robot are field replaceable. Contact Kinova for
assistance in the case of any component breakdown or malfunction.

Preventive Maintenance

Some preventive maintenance tasks are helpful for protecting your robot and getting the most
out it over time:

•

Cleaning contacts on base controller

 - keep contacts clear of dust and contamination, wiping

electrical contacts regularly with a soft moistened cloth.

•

Fine adjustment of base clamp

 - Some adjustment may be needed for the base clamp to

ensure that the robot is firmly clamped onto the base controller. Within the clamp is an
adjustment screw which can be adjusted to tighten the clamp as needed.

Summary of Contents for Gen3





















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands