15
E
N
8.
RESET procedure
Reset procedure deletes gate travel parameters (par. 5) and all advanced functions (par. 10). It can be performed in case of programming
mistakes and it brings the STARG8 control board to factory settings.
This reset doesn’t affect memorised radio transmitters (see par. 4 for radio transmitters management).
1.
PRESS THE
START
BUTTON
FOR 8 SECONDS OR UNTIL ALL
LEDS ARE FLASHING
2.
RELEASE
START
BUTTON
3.
PRESS
START
BUTTON
FOR 3 SECONDS
All LED flash
All LED continue to flash
All LED light up in series
5.
A NEW PROGRAMMING OF THE
GATE TRAVEL IS REQUIRED
4.
RESET IS NOW COMPLETED
The red “ERROR” LED lights flashes 3
times continuously
