9
E
N
4.3 -
Deleting all memorised transmitters
This operation deletes all memorised transmitters from the memory.
1.
PRESS THE
RADIO
BUTTON FOR
4 SECONDS AND RELEASE WHEN
RADIO LED FLASHES
2.
PRESS THE
RADIO
BUTTON AGAIN
FOR 1 SECOND
3.
MEMORY DELETION COMPLETED
The red “radio” LED flashes
(if not, consult Paragraph 16.1)
The red “radio” LED flashes fast
The red “radio” LED turns off
4.4 -
Deleting a single transmitter
This operation deletes a single transmitter from the memory.
1.
PRESS THE
RADIO
BUTTON FOR
4 SECONDS AND R ELEASE WHEN
RADIO LED FLASHES
2.
PRESS THE
SET
BUTTON
FOR 1 SECOND
3.
PRESS A BUTTON ON THE
TRANSMITTER YOU WISH TO
DELETE
The red “radio” LED flashes
(if not, consult Paragraph 16.1)
The red “radio” LED flashes and the
yellow “set” LED flashes
3.
PRESS THE
RADIO
BUTTON UNTIL RADIO LED TURNS
OFF OR WAIT 20 SECONDS TO EXIT
THE PROCEDURE
The red “radio” LED and the
yellow“set” LED turn off
4.5 -
Transmitter ( Remote ) tools - free programming
This procedure enables you to program a new transmitter (“Stylo2K” or “Stylo4K”) without accessing the control unit, by staying close to it.
To run the procedure you will require a previously programmed transmitter and you need to be at the gate
ON A PREVIOUSLY
PROGRAMMED
TRANSMITTER, HOLD
DOWN
BUTTONS 1
AND
2
TOGETHER FOR
4 SECONDS
ON THE TRANSMITTER
YOU WANT TO PROGRAM,
HOLD DOWN
BUTTONS 1
AND
2
TOGETHER FOR
4 SECONDS
The red “radio” LED flashes and the
yellow “set” LED turns on
