8
EN
4.
Transmitter (remote control unit) programming
1
23
45
6
78
E
RR
O
R
S
TOP
PH
O
TO
S
TA
R
T
RADIO
S
E
T
1
2
3
4
5
6
7
8
E
RR
O
R
S
TOP
PH
O
TO
S
TA
R
T
RADIO
S
E
T
The transmitters to be programmed must be of the “Stylo4K” or “Stylo2K” series by
King Gates. See adjacent pictures.
, it means that the programming pro-
tections have been activated – see Paragraph 16.1.
Therefore radio transmitters learning is not possible.
To interrupt any of the following procedures at any time, press the SET and RADIO
buttons simultaneously or wait 10 seconds
4.1 -
Start button programming
This procedure allows to programme a button of the transmitter ( remote control ) to the controll unit .
1.
ON THE CONTROL UNIT
PRESS THE
RADIO
BUTTON
FOR 1 SECOND
2.
PRESS THE DESIRED BUTTON
ON EVERY TRANSMITTER
TO BE PROGRAMMED
3.
PRESS THE
RADIO
BUTTON UNTIL RADIO LED TURNS
OFF OR WAIT 20 SECONDS TO EXIT
THE PROCEDURE
The red “radio” LED turns off
4.2 -
Pedestrian opening button programming
This procedure allows to programme a button of the transmitter for partial / pedestrian opening to the control unit.
This opening width can be customised following the procedure described in Paragraph 5.2.
1.
PRESS THE
RADIO
BUTTON
FOR 1 SECOND
2.
PRESS THE
START
BUTTON
FOR 1 SECOND
3.
PRESS THE DESIRED BUTTON
OF ALL THE TRANSMITTERS
TO BE PROGRAMMED
3.
PRESS THE
RADIO
BUTTON UNTIL RADIO LED TURNS
OFF OR WAIT 20 SECONDS TO EXIT
THE PROCEDURE
The red “radio” LED and the green
“start” LED turn off
Start button
Set button
Radio button
4
“Stylo4K”
“Stylo2K”
The red “radio” LED remains lit and
the green “start” LED turns on
green “start” LED turns on
The red “radio” LED turns steady on
(if not, see paragraph 16.1)
The red “radio” LED turns steady on
(if not, see paragraph 16.1)
