Kilsen KFP-CE4 Series, Installation Manual

Page: 72 / 92

Chapter 5: Technical specifications
66 KFP-CE4 Series Installation Manual
Table 30: Output specifications
Output termination
Class B outputs (default)
Class A outputs
15 kΩ 5% end -of-line resistor
4.7 kΩ 1/4W 1% end -of-line resistor
Sounder outputs [1]
Supervised
Current per output
Voltage in standby (EN 54 -13 disabled)
Voltage in standby (EN 54 -13 enabled)
Voltage in alarm
For open and short circuit
500 mA max. at 25ºC
385 mA max. at 40ºC
−11.5 VDC max.
−8.4 VDC max .
+28 VDC max.
Fire routing outputs [1]
Supervised
Current per output
Voltage in standby (EN 54 -13 disabled)
Voltage in standby (EN 54 -13 enabled)
Voltage in alarm
For open and short circuit
250 mA max.
−11.5 VDC max.
−8.4 VDC max.
+28 VDC max.
Alarm relay output
Number of potential-free outputs
Commutation current
1
2 A at 30 VDC max.
Fault relay output
Number of potential-free outputs
Commutation current
Default state
1
2 A at 30 VDC max.
Energized (fail to safe)
Auxiliary 24 VDC outp ut
Voltage
Current
24 VDC nominal
28 VDC max.
21 VDC min.
250 mA max.
[1] The number of available outputs depends on the control panel model, supervision type, and
operating mode. See “ Operating mode presets” on page 72 for more information.
Power supply specifications
Table 31: Mains supply specifications
Operating voltage 110 VAC / 60 Hz or 240 VAC / 50 Hz
Rated current
1 10 VAC
240 VAC
3.15 A
1.5 A
Voltage tolerance +10% / −15%
Mains fuse
110 VAC
240 VAC
T 3.15A 250V
T 2A 250V