![Kilsen KFP-CE4 Series Installation Manual Download Page 35](http://html1.mh-extra.com/html/kilsen/kfp-ce4-series/kfp-ce4-series_installation-manual_1967146035.webp)
Chapter 3: Configuration and commissioning
KFP-CE4 Series Installation Manual
29
Common configuration tasks
To enter configuration mode:
1.
Remove the control panel
cover so that the seven-segment display is visible.
2. Enter a valid Installer user level password (3333 for basic configuration or
4444 for advanced configuration).
3. Press Enter.
When first entering configuration mode, the Mode LED on the seven
-segment
display is steady. For other indications see Table
16
on page 28.
To select a menu:
1. Select the required menu using the menu selection buttons (1 and 3).
2. Press Enter.
When a configuration menu has been selected, the Value LED on the seven
-
segment display is steady.
To select a value:
1. Select the required value using the value selection buttons (2 and 4).
2. Press Enter.
To exit configuration mode and save your changes:
1. Press Panel Silence.
2. Press Enter.
— or —
1.
Set the display as shown below, and then press Enter.
The Panel Silence
LED flashes to confirm that a configuration change has been
applied.
Note:
Make all the configuration changes required before exiting configuration
mode and saving your changes.
To exit configuration mode without saving your changes:
1.
Press Reset
— or —
1.
Set the display as shown below, and then press Enter.
The control panel will exit configuration mode after 5 minutes if no button is
pressed.
Summary of Contents for KFP-CE4 Series
