Kilsen KFP-CE4 Series, Installation Manual

Page: 88 / 92

Appendix B: Product compliance
82 KFP-CE4 Series Installation Manual
European standards
European standards for fire control and indicating equipment
The KFP-CE4 Series fire and evacuation control panels have been designed in
accordance with European EN 54- 2, EN 54- 4, and NEN 2575 standards.
In addition, all models comply with the following EN 54 -2 optional requirements.
Table 51: EN 54-2 optional requirements
Option
Description
7.8 Output to fire alarm devices [1]
7.9.1 Output to fire alarm routing equipment
7.9.2 Alarm confirmation input from fire alarm routing equipment
7.11 Delays to outputs
7.13 Alarm counter [2]
8.4 Total loss of the power supply
8.9 Output to fault warning routing equipment [3]
10 Test condition
[1] Inputs and outputs on the optional 2010-1-SB expansion board do not support the optional
requirement of EN 54-2 clause 7.8 and should not to be used for fire alarm devices.
[2] Applies only to models with the suffix NL.
[3] NEN 2575 with EN 54-13 supervision operating mode only
European standards for electrical safety and electromagnetic compatibility
These control panels have been designed in accordance with the following
European standards for electrical safety and electromagnetic compatibility:
• EN 60950 -1
• EN 50130-4
• EN 61000 - 6 -3
• EN 61000 -3-2
• EN 61000 -3-3
EN 54-13 European compatibility assessment of system components
These control panels form part of a certified system as described by the EN 54-
13 Standard when installed and configured for EN 54-13 operation as described
by the manufacturer in the corresponding installation documentation.
Contact your installation or maintenance contractor to determine whether your
fire alarm and evacuation system is compliant with this standard.