Kikusui TOS5200 User Manual Download

Page: 8 / 82

TOS5200

Search by Topic

• What accessories are included in the

package?

➔

“Checking the Package Contents”

p.2

• Before I start testing, I want to check

that the TOS5200 is operating safely.

➔

“Turning the Power On”

p.22

• How do I use each of the two test leads?

➔

“Using test leads”

p.24

• I want to check that measurements are

being performed correctly before I start
testing.

➔

“Pre-Test Inspection”

p.62

• I want to know more about the interlock

feature.

➔

“Interlock Feature”

p.58

Preparation

• Other than the basic settings that are

shown on the panel, what test
conditions can be set?

➔

“Test conditions (additional items)”

p.42

➔

“CONFIG Settings”

p.44

• How are measured values judged?

➔

“About Judgment”

p.40

• How does the TOS5200 display the

judgment results?

➔

“When a test finishes”

p.51

• How can I hold the PASS judgment

result?

➔

“Judgment result hold time (Pass Hold)”

p.45

Setup

Summary of Contents for TOS5200



















































































Search results

Summary of Contents for TOS5200

Reviews:

Related manuals for TOS5200

Brands by name

Popular brands

Kikusui TOS5200, User Manual

Search results

Summary of Contents for TOS5200

Reviews:

Related manuals for TOS5200

Brands by name

Popular brands