Kikusui TOS5200, User Manual

Page: 69 / 82

TOS5200
69
Specifications
8
S
p
ecif
ica
tions
General
TOS5200
Display LCD: LED backlight custom design
Environment Installation location Indoors, at a height of up to 2000 m
Spec guaranteed
range Temperature 5 °C to 35 °C (41 °F to 95 °F)
Humidity 20 % rh to 80 % rh (no condensation)
Operating range Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 20 % rh to 80 % rh (no condensation)
Storage range Temperature -20 °C to 70 °C (-4 °F to 158 °F)
Humidity 90 % rh or less (no condensation)
Power supply Nominal voltage range (allowable voltage
range) 100 Vac to 240 Vac (90 Vac to 250 Vac)
Power
consumption When no load is
connected (READY) 100 VA or less
Rated load 800 VA max.
Allowable frequency range 47 Hz to 63 Hz
Insulation resistance (between AC LINE and the chassis) 30 M
Ω
or more (500 Vdc)
Withstanding voltage (between AC LINE and the chassis) 1500 Vac, 1 minute
Earth continuity 25 Aac, 0.1
Ω
or less
Electromagnetic compatibility (EMC)
1
1 Limited to products that have the CE mark on their panels. Does not apply to specially made or modified TOS5200s.
Complies with the requirements of the following directive and stand-
ards.
EMC Directive 2004/108/EC
EN 61326-1 (Class A
2
)
EN 55011 (Class A
2
, Group 1
3
)
EN 61000-3-2
EN 61000-3-3
Applicable under the following conditions
The maximum length of all cabling and wiring connected to the
TOS5200 is less than 2.5 m.
Shielded cables are being used when using the SIGNAL I/O.
The high-voltage test lead TL31-TOS is being used.
Electrical discharges are not occurring outside the DUT.
2 This product confirms to Class A. This product is intended for use in an industrial environment. This product may cause interference
if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emis-
sions to prevent interference to the reception of radio and television broadcasts.
3 This product confirms to Group 1. This product does not generate and/or use intentionally radio-frequency energy, in the form of
electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of material or inspection/analysis purpose.
Safety
1 Complies with the requirements of the following directive and stand-
ards.
Low Voltage Directive 2006/95/EC
EN 61010-1 ed3 (Class I
4
, Pollution degree 2)
4 This product confirms to Class I. Be sure to ground the protective conductor terminal of this product. If not grounded properly, safe-
ty is not guaranteed.
Dimensions See “Outline drawing”.
Weight Approx. 14 kg (30.9 lb.)
Accessories Power cord 1 pc.
High-voltage test lead (TL31-TOS) 1 set (1 red wire and 1 black wire, each with alligator clips); 1.5 m
SIGNAL I/O plug 1 set; assembly type
High-voltage warning sticker 1 pc.
Setup Guide 1 pc.
Quick Reference English: 1 pc. , Japanese: 1 pc.
Safety Information 1 pc.
CD-ROM 1 pc.