Kikusui TOS5200, User Manual

Page: 2 / 82

2
TOS5200
These manuals are intended for users of the Withstanding
Voltage Tester and their instructors. Explanations are given
under the presumption that the reader has knowledge related
to electricity.
Manual construction
■
Setup Guide
This manual is intended for first-time users of the product. It
gives an overview of the product, connecting procedures,
safety precautions, etc. Please read this manual before you
operate the product.
■
Quick Reference
The quick reference briefly explains the control panel and
the basic operation of it.
■
Safety Information
This document contains general safety precautions for this
product. Keep them in mind and make sure to observe
them.
■
User’s Manual (this manual, PDF)
This manual is intended for first-time users of this product. It
provides an overview of the product, notes on usage, and
specifications. It also explains how to connect the product,
configure the product, operate the product, perform mainte-
nance on the product, and so on.
■
Communication Interface Manual (PDF)
This manual explains how to control the product remotely
using commands. It is included on the CD-ROM.
The interface manual is written for readers with sufficient
basic knowledge of how to control measuring instruments
using a PC.
PDF files are included in the accompanying CD-ROM.
You can view the PDF files using Adobe Reader 6.0 or later.
Every effort has been made to ensure the accuracy of this
manual. However, if you have any questions or find any errors
or omissions, please contact your Kikusui agent or distributor.
If you find any misplaced or missing pages in the manuals,
they will be replaced. If the manual gets lost or soiled, a new
copy can be provided for a fee. In either case, please contact
your Kikusui agent or distributor. At that time, inform your
agent or distributor of the “Part No.” written on the front cover
of this manual.
After you have finished reading this manual, store it so that
you can use it for reference at any time.
Firmware versions that this manual covers
This manual covers firmware versions 1.0X.When contacting
us about the product, please provide us with:
Model (marked in the top section of the front panel)
The firmware version (see page 23)
The serial number (marked in the bottom section of the rear
panel)
Trademarks
Microsoft, Windows, and Visual Basic are registered trade-
marks of Microsoft Corporation in the United States and/or
other countries.
All company names and product names used in this manual
are trademarks or registered trademarks of their respective
companies.
Copyrights
The contents of this manual may not be reproduced, in whole
or in part, without the prior consent of the copyright holder.
The specifications of this product and the contents of this man-
ual are subject to change without prior notice.
©
2014 Kikusui Electronics Corporation
When you receive the product, check that all accessories are
included and that the accessories have not been damaged
during transportation.
If any of the accessories are damaged or missing, contact
your Kikusui agent or distributor.
We recommend that you save all packing materials, in case
the product needs to be transported at a later date.
About the Manuals
Checking the Package Contents
or or
High-voltage test lead
(1 set)
[TL31-TOS]
Setup Guide (1 pc.)
[Z1-006-140]
Power cord (1 pc.)
Rating: 125 Vac, 10 A
Plug: NEMA5-15
[85-AA-0003]
Rating: 250 Vac, 10 A
Plug: GB1002
[85-10-0790] Rating: 250 Vac, 10 A
Plug: CEE7/7
[85-AA-0005]
SIGNAL I/O
plug (1 set)
Assembly type
(D-sub plug unit) High-voltage warning
sticker (1 pc.)
[A8-210-202]
CD-ROM (1 pc.)
[SA-6071]
Japanese (1 sheet): [Z1-006-150]
English (1 sheet): [Z1-006-152]
Quick Reference
Safety Information (1 pc.)
[Z1-005-040]
The power cord that is provided varies depending on the
destination for the product at the factory-shipment.