Kikusui KJM6310, Operation Manual

Page: 15 / 56

KJM6310 Setup 1-3
■
Avoid humid environments.
Do not place the KJM6310 in high-humidity locations--near a boiler,
humidi fi er, or water supply.
Operating humidity range: 20 % to 85 % RH (no condensation)
Storage humidity range:
0 to 90 % RH (no condensation)
Condensation may occur even within the operating humidity range.
In such cases, do not use the KJM6310 until the condensation dries
up completely.
■
Do not place the KJM6310 in a corrosive atmosphere.
Do not install the KJM6310 in a corrosive atmosphere or in environ-
ments containing sulfuric acid mist, etc. This may cause corrosion of
various conductors and bad contacts of connectors inside the
KJM6310 leading to malfunction and failure, or in the worst case, a
fi re.
■
Do not place the KJM6310 in a dusty location.
Accumulation of dust can lead to electric shock or fi re.
■
Do not place the KJM6310 on an inclined surface
or location subject to vibrations.
The KJM6310 may fall or tip over causing damages and injuries.
■
Do not use the KJM6310 in a location subject to
strong magnetic or electric fi elds.
The KJM6310 may malfunction and cause electric shock or fi re.
■
Do not place objects on top of the KJM6310.
Placing objects on top of the KJM6310 can cause failures (especially
heavy objects).