Kikusui KJM6310, Operation Manual

Page: 19 / 56

KJM6310 Operation 3-1
Chapter 3 Operation
This chapter describes the basic operations of the KJM6310 from the
panel.
3.1 Connecting the Signal
Connect the RF signal to the RF SIGNAL INPUT connector.
To measure time intervals using two signals, connect the clock signal
to the CLOCK INPUT connector.
Refer to the
fi gures to connect the DUT to the KJM6310 and set the
functions according to the input signal.
1. Time interval jitter measurement using sliced RF signal and regen-
erated clock signal (measurement using two binary-coded signals)
*1 Do not turn both RF EDGE switches to (ON).
Fig.3-1
Function setup switches
PLL OFF
SYMMETRY MANUAL
CLOCK EDGE Any
RF EDGE
*1
either
CD player, etc.
KJM6310
Sliced RF signal
Clock signal
Clock
regeneration
circuit
Slicer Pickup