Kikusui KJM6310, Operation Manual

Page: 51 / 56

KJM6310 Specifications 6-1
Chapter 6 Speci fi cations
This chapter describes the electrical and mechanical speci fi cations of
the KJM6310.
The speci
fi cations apply to the following conditions.
• Warm-up time: 30 minutes
• Temperature: 15
°
C to 35
°
C
• Humidity: 20 % RH to 85 % RH (no condensation)
6.1 Electrical Speci fi cations
Input section
Measurement section
RF input Input signal EFM signal
Minimum pulse width 15 ns
Signal voltage range 0.2 Vp-p to 2 Vp-p
Input impedance 50
Ω
Maximum input voltage
±
4 V (DC + AC peak)
Input connector BNC
CLOCK
input Input signal Clock frequency
4 MHz to 18 MHz
Duty cycle 45:55 to 50:50
Signal voltage range 0.2 Vp-p to 2 Vp-p
Input impedance 50
Ω
Maximum input voltage
±
4 V (DC + AC peak)
Input connector BNC
Measurement range 0 % to 20 % or 0 ns to 50 ns
Spec guaranteed range 4 % to 15 % of the clock period
Measurement
accuracy When measuring
percentage
±
0.75 % of the clock period
When measuring
ns
±
2 % of the clock period
Residual jitter 2 % or less
Time constant for conversion into rms values 10 ms, 100 ms, or 1 s