Kikusui KJM6310, Operation Manual

Page: 52 / 56

6-2 Specifications KJM6310
Trigger section
PLL clock regeneration section
Frequency response characteristics are valid for reference clock = 4.3 MHz.
*1 Complies with CD Reference: Compact Disc Reference Measuring Methods
Speci fi cation Guideline Ver.1.0 May 1999.
Output section
Symmetry follow-up AUTO, AUTO+ OFFSET, or MANUAL
Trigger edge RF Rising edge, falling edge, or both
CLOCK Rising edge or falling edge
Delay Adjust the phase difference with the RF
signal by delaying the CLOCK signal
AUTO or MANUAL switchable
MANUAL adjustment range 0
°
to 360
°
Synchronizable signal EFM signal that corresponds to a funda-
mental frequency of 4.1 MHz to 4.5
MHz.
Frequency response characteristics
(100 Hz reference, closed-loop charac-
teristics)
*1
1 kHz: 0.19 ± 1.7 dB
5 kHz: –0.15
±
1.7 dB
10 kHz: –1.17 ± 1.7 dB
20 kHz: –3.82
±
1.7 dB
25 kHz: –5.10 ± 1.7 dB
Lockup time Within 700 ms
Synchronizable jitter range 5 % to 17 %
Residual jitter 2 % or less
DC OUT Output amplitude
(when open) 0.2 V/% and accuracy of
±
0.15 V
Output impedance Approx. 600
Ω
JITTER
OUT Output amplitude
(when open) 20 mV/%
Output impedance Approx. 600 Ω