Kikusui KJM6310, Operation Manual

Page: 14 / 56

1-2 Setup KJM6310
1.2 Installation
How to install the KJM6310
■
The KJM6310 is designed for embedded application
and provides attachment screw holes on the side
and bottom panels. To fi x the KJM6310 in place, use
these screw holes. If you are not fi xing the KJM6310
in place, attach the stand provided to the bottom
panel and place the KJM6310 so that it stands up.
Secure adequate space around the KJM6310 so
that air can circulate around it.
Precautions concerning installation location
This section describes the precautions to be taken when installing the
KJM6310. Make sure to observe them.
■
Do not use the KJM6310 in a fl ammable atmosphere.
To prevent the possibility of explosion or fi re, do not use the
KJM6310 near alcohol, thinner or other combustible materials, or in
an atmosphere containing such vapors.
■
Avoid locations where the KJM6310 is exposed to
high temperature or direct sunlight.
Do not place the KJM6310 near a heater or in areas subject to drastic
temperature changes.
Operating temperature range:
0 ° C to 40 ° C
Spec guaranteed temperature range: 15 ° C to 35 ° C
Storage temperature range: -20 ° C to 60 ° C
30 mm or more 30 mm or more
30 mm or more
30 mm
or more
30 mm
or more
30 mm
or more
[When using the stand]