Keysight U8030A Series, User Manual

Page: 35 / 66

1 Introduction
34 Keysight U8030A Series User’s Guide
List of Error Codes
The following errors indicate failures that may occur while operating the power
supply.
System errors
Power channel errors
Table 1-5 List of system error codes
Error code Description
001 Failed firmware test
002 Failed RAM test
003 Flash read/write error
Table 1-6 List of power channel error codes
Error code Description
104 EEPROM write error
105 Analog board firmware update error
106 Analog board firmware checksum error
107 EEPROM read error
108 Failed to calibrate voltage DAC
109 Failed to calibrate voltage ADC
110 Failed to calibrate OVP
111 Failed to calibrate current DAC
112 Failed to calibrate current ADC
113 Failed to calibrate OCP
119 Analog board unknown error