Keysight U8030A Series, User Manual

Page: 49 / 66

2 Operation and Features
48 Keysight U8030A Series User’s Guide
Recalling an operating state
1 Recall a previously stored operating state.
– Press and hold the [Memory] button until the M1 annunciator stops
blinking.
– The M1 annunciator turns on.
– The display shows the settings stored in the M1 memory location.
2 Turn the knob to show the settings saved in M1, M2, and M3 memory
locations.
– The M1 , M2 , and M3 annunciators will turn on in a round-robin manner.
– The display shows the settings stored in the M1 , M2 , and M3 memory
location in a round-robin manner.
3 Press the [Memory] button again to recall the stored operating state in the
chosen memory location.
– The display will show dOnE .
– The M1 , M2 , and M3 annunciators turn off.
NOTE
To cancel this operation, allow the unit to idle for five seconds.