Keysight U8030A Series, User Manual

Page: 32 / 66

Introduction 1
Keysight U8030A Series User’s Guide 31
12 OVP1
When the OVP1 annunciator is steady, the overvoltage protection function for
Output 1 is enabled.
When the
OVP1 annunciator is blinking, an overvoltage condition has occurred.
The power supply output is disabled until the trip is cleared.
13 OCP1
When the OCP1 annunciator is steady, the overcurrent protection function for
Output 1 is enabled.
When the
OCP1 annunciator is blinking, an overcurrent condition has occurred.
The power supply output is disabled until the trip is cleared.
14 OVP2
When the OVP2 annunciator is steady, the overvoltage protection function for
Output 2 is enabled.
When the
OVP2 annunciator is blinking, an overvoltage condition has occurred.
The power supply output is disabled until the trip is cleared.
15 OCP2
When the OCP2 annunciator is steady, the overcurrent protection function for
Output 2 is enabled.
When the
OCP2 annunciator is blinking, an overcurrent condition has occurred.
The power supply output is disabled until the trip is cleared.
16 5VOL
An overload condition has occurred in the 5 V output channel. The power supply
output is disabled until the trip is cleared.
17 TRACK The track operation is active.
18 5 V The power supply is supplying a constant voltage of 5 V from the 5 V binding posts.
19 OUT1 Output 1 is selected.
20
CV The power supply is supplying constant voltage from the Output 1 binding posts.
CC The power supply is supplying constant current from the Output 1 binding posts.
21 OUT2 Output 2 is selected.
22
CV The power supply is supplying constant voltage from the Output 2 binding posts.
CC The power supply is supplying constant current from the Output 2 binding posts.
Table 1-4 LCD display legends and descriptions (continued)
Legend Description