Keysight U8030A Series, User Manual

Page: 50 / 66

Operation and Features 2
Keysight U8030A Series User’s Guide 49
Memory Output Operations
The Memory Output feature allows operating states from the M1 , M2 , and M3
memory locations to be recalled automatically in sequential order.
Three time intervals are programmable:
–
Δ t
1
— time delay between recalling M1 and recalling M2 .
–
Δ
t
2
— time delay between recalling M2 and recalling M3 .
–
Δ
t
3
— time delay between recalling M3 and recalling M1 .
Enable the memory output single operation
1 Enable the memory output single operation.
– Press and hold the [Memory Output] button. The display shows HOLd until
the memory output operation is enabled.
– The
Δ
t annunciator turns on, and all the M1 , M2 , and M3 annunciators turn
on.
– The operating state from M1 memory location is recalled immediately.
– The M1 annunciator blinks. The M2 and M3 annunciators are steadily on.
– After waiting for Δ t
1
, the operating state from M2 memory location is
recalled.
– The M2 annunciator blinks. The M1 and M3 annunciators are steadily on.
– After waiting for
Δ
t
2
, the operating state from M3 memory location is
recalled.
– The M3 annunciator blinks for two seconds. The M1 and M2 annunciators
are steadily on.
– The memory output operation is completed.
– The
Δ t annunciator turns off, and all the M1 , M2 , and M3 annunciators turn
off.