Keysight E3632A, User Manual

Page: 41 / 196

Getting Started 1

Product at a Glance
E3632A User’s Guide 19
3 Overvoltage protection key Enable or disable the overvoltage protection function, set the trip
voltage level, and clear the overvoltage condition.
4 Overcurrent protection key Enable or disable the overcurrent protection function, set the trip
current level, and clear the overcurrent condition.
5 Display limit key Display the voltage and current limit values on the display and allow
the knob adjustment for setting the limit values.
6 Recall operating state key Recall a previously stored operating state from location 1, 2, or 3.
7 Store operating state/Local key
[1]
Store an operating state in location 1, 2, or 3 or return the power
supply to the local mode from the remote interface mode.
8 Error/Calibrate key
[2]
Display the error codes generated during operation, self-test, and
calibration or enable the calibration mode (the power supply must be
unsecured before performing calibration). Refer to the
Service Guide
(E3632-90010) for more details on calibration.
9 I/O Configuration/Secure key
[3]
Configure the power supply for remote interfaces, or secure or
unsecure the power supply for calibration. Refer to the
Service Guide
(E3632-90010) for more details on how to secure or unsecure the
power supply.
10 Output On/Off key Enable or disable the power supply output. This key toggles between
on and off.
11 Control knob Increase or decrease the value of the flashing digit by turning
clockwise or counter-clockwise.
12 Resolution selection keys Move the flashing digit to the right or left.
13 Voltage/Current adjust selection key Select the knob control function for voltage or current adjustment.
[1] The key can be used as the Local key when the power supply is in the remote interface mode.
[2] You can enable the calibration mode by holding down this key when you turn on the power supply.
[3] You can use it as the Secure or Unsecure key when the power supply is in the calibration mode.
Table 1-3 Front panel overview (continued)
No Item Description