1
Keysight ZA0060A Quick Start Guide
57
Test Plan Execution Error Messages
Could Not Create ‘<Test Step>’: License Required: KS8330XA
You will see the following message when you do not have the measurement suite
plug-ins license.
You will need to purchase the following license that are offered in the ZA0060A:
– KS83304B:
Bluetooth
®
5 and
Bluetooth
®
Low Energy 4.2 Signaling.
– KS83305B: Zigbee 3.0 and Zigbee Pro Signaling.
Once you have purchased the license(s), you will receive an entitlement certificate
via email. Follow the instructions in the email to redeem the license.
34972A Front Panel Annunciator Turn On
Refer to Chapter 5: Error Messages in
.
Fail Self Test Status
The example below is the interface you would expect where your 34999B radio
module reported a
FAIL
Self Test Status on the Keysight 34999 Utility software.
The following are a list of possible reasons:
– No written manufacturing calibration data.
– Flash memory could be corrupted.
If the self-test fails, troubleshoot or replace the 34999B module.
