8
Installation Note N9010-90054
Installation Procedure
Installation Procedure
Analyzer Information
1.
Connect a power cord to the analyzer and turn on the analyzer.
2.
After the analyzer has completed turning on, press
System
,
Show
,
System
. Make note of the
following information from the Show System screen:
Product Number ________________
Serial Number ________________
Instrument S/W Revision ________________
3.
Check for the presence of the options listed below in the Show System screen (“x” is 1 for an
EXA and 2 for an MXA). Put a check mark or “X” after each option listed below that appears in
the Show System menu.
N90x0A-503 ______
N9010A-532 ______
N9010A-544 ______
N90x0A-B25 ______
N90x0A-BBA ______
N90x0A-CR3 ______
N90x0A-CRP ______
N90x0A-B40 ______
N90x0A-DP2 ______
N90x0A-MPB ______
4.
On the analyzer, press
System
,
Show
,
Hardware
. Note the Part #, Matl Rev, Rev, OF Rev, and
Hw Id of the Front End Controller and Front End in the table below.
5.
If the analyzer is equipped with any of the following options (refer to the data in
above),
N90x0A-B40
N90x0A-DP2
N90x0A-MPB
Do not proceed
with the installation of this upgrade kit. If any of these options are already
installed, you do not need this upgrade kit, since the necessary hardware is already present.
Assembly Name
Part #
Matl Rev
Rev
OF Rev
Hw Id
Front End Controller
Front End
