16
Installation Note N9010-90054
Installation Procedure
Portable Instrument (Option PRC)
1.
Disconnect the instrument from ac power.
2.
Refer to
. Using the T-20 driver, remove the four screws (two on each side)
(1)
that
hold the bail handle
(2)
to the front frame.
Figure 4
Bail Handle Removal
3.
Using the T-20 driver, remove the four screws (two on each side)
(6)
that hold the strap
handle plugs
(5)
in place.
Make sure any adapters on the front panel are removed.
