Keysight Technologies Infiniium MSOV 084A, Service Manual

Page: 119 / 164

Replacing Assemblies
5
Infiniium V-Series Oscilloscopes Service Guide 119
4
Remove the 2 or 3 guide posts (3 for MSO and serial trigger boards) from the
old backplane board using an open-end wrench. Install them onto the new
board and torque to 5 in-lbs.
)
5
Install the oscillator assembly into the backplane board, using the bracket to
guide the orientation. Start the 3 screws through the oscillator bracket and into
the backplane bracket in the order shown below.
)
Figure 58
Figure 59