5. PANEL EXPLANATION
5-1 Front Panel
© POWER ON _ - l / OFF J L Switch
T h i s is the power s w i t c h . T h e power is turned on w h e n this
s w i t c h is pressed. T h e power is turned off w h e n this s w i t c h
is pressed again.
Nothing is displayed on the panel for approximately three
seconds after the power is turned on.
© Voltmeter
T h i s indicates the positive ( + ) and negative ( - ) setting
values for the voltage and the output voltage.
The last-digital data may not be stable due to display
resolution. However, the output, does not fluctuate.
* If a reverse voltage is generated 0 . 0 0 V is displayed and
the display f l a s h e s .
© A m m e t e r
This indicates the output current value and the setting value
of the positive ( + ) and negative ( - ) output current.
@ Rotary Encoder Knob (for setting voltage and current values)
A rotary encoder knob is used to specify the output voltages
and the output current limit v a l u e s (negative and positive).
If the V L E D © is turned'on the voltage value displayed by
the voltmeter @ c a n be changed by using this rotary
encoder.
If the A L E D © is turned on, the current limit value dislayed
by the Ammeter © can be changed with this rotary encoder.
T h e values displayed on the voltmeter and the ammeter will
be incremented it the knob is rotated c l o c k w i s e .
Fig.
2
11
