26
Parameter List
–
Other (contd.)
P93
Drum Trigger Length
(default: 80)
Range: 0 to 127 (each increment represents 45.7µs, for a maximum length of 5.8ms)
Sets the duration of the output pulse when Drum Trigger is being used as a controller.
P94
Aux 1 Slew Rate
(default: 0)
Range: 0 to 31
Sets the slew rate or granularity of the Aux 1 Controller. This parameter can be used to smooth out a
steppy response from CCs at the expense of a time delay.
P95
Aux 2 Slew Rate
(default: 0)
Range: 0 to 31
As above.
P96
Aux 3 Slew Rate
(default: 0)
Range: 0 to 31
As above.
P97
Program Change Receive Enable
(default: Off)
Range: Off or On
Sets whether or not MIDI Program Change messages can be used to change the current Setup.
P98
Load Program
Range: 1 to 32
Sets the program to be loaded as the current Setup. Having selected a program to load, hold the SELECT
button for approximately 6 seconds until
“
Lod
”
appears in the display.
P99
Store Program
Range: 1 to 32
Sets the program into which the current setup will be saved. Having selected a program to save to,
hold the SELECT button for approximately 6 seconds until
“
Sto
”
appears in the display.
