29
MIDI Analyser
The PRO SOLO Mk3 has a built-in MIDI analyser function. This feature allows you to see what
types of MIDI messages are being transmitted by your master keyboard / sequencer, making
the PRO SOLO Mk3 a useful diagnostic tool.
To enter Analyser Mode, power on the PRO SOLO Mk3 whilst holding the SELECT button.
The display will show “Anl”, followed by “rc” when you release the button.
The MIDI analyser has several different modes, each of which will respond to a particular
MIDI message or group of messages, and are accessed by pressing or holding the buttons:
SELECT, short press
[rc]
Receive Channel & Status
SELECT, long press
[PC]
Program Change
DEC, short press
[nt]
Note Number
DEC, long press
[nv]
Velocity
INC, short press
[Cn]
CC Number
INC, long press
[Cv]
CC Value
‘Receive Channel & Status’ w
ill display the channel of the last MIDI message received in
the right two digits. The segments of the left digit blink to show incoming MIDI messages:
The other modes will simply display across all of the digits the last received MIDI message
of the selected type. Pitch Bend and Aftertouch are shown with the CCs, although they are
technically a different message type. In all modes, the PARA dot will blink with any MIDI
message type.
To exit the MIDI Analyser mode, power the PRO SOLO Mk3 off and on again.
