24
Parameter List
–
ADSR Envelope Generator
P80
EG Attack Time
(default: 40)
Range: 0 to 127
Sets the time for the attack phase of the ADSR envelope.
P81
EG Decay Time
(default: 40)
Range: 0 to 127
Sets the time for the decay phase of the ADSR envelope.
P82
EG Attack Time
(default: 64)
Range: 0 to 127
Sets the level the ADSR envelope will sustain at.
This phase will be held if the Sustain Pedal (CC 64) is pressed.
P83
EG Release Time
(default: 40)
Range: 0 to 127
Sets the time for the release phase of the ADSR envelope.
P84
EG Invert
(default: Off)
Range: Off or On
Sets whether or not the ADSR envelope will be inverted
–
i.e. envelope will start at its maximum level.
P85
EG Reset to Zero
(default: On)
Range: Off or On
Sets whether or not new notes will cause the envelope to reset to its starting point if it has not completed its
cycle; otherwise it will continue at its previous level.
