4
Introduction
Congratulations on your purchase. The PRO SOLO Mk3 is a high specification, extremely
accurate and flexible MIDI to control voltage converter. This new third version of our long-
running PRO SOLO series now includes additional auxiliary outputs, a built-in ADSR envelope
generator and the ability to generate trigger outputs for drum synthesizers.
Connections
MIDI IN
Plug your
MIDI keyboard or sequencer’s output
in here.
MIDI THRU / SYNC 24
Software selectable to operate either as a MIDI
Thru or as a Sync 24 port (also known as DIN-
SYNC), for clocking vintage drum machines etc.
CV
Plug this into your
synthesizer’s input marked
CV IN, VCO IN, KYBD IN, etc. This voltage
controls the pitch of the oscillator(s) on your
synthesizer.
GATE
Plug this into your synthesizer’s input marked
GATE, V-TRIG, S-TRIG, etc. This signal turns the
note on and off on your synthesizer.
AUX 1, 2 & 3
The Aux outputs can be assigned to many
different things on the PRO SOLO Mk3, but are
commonly used to connect to filter, volume or
clock inputs on a synthesizer.
DC IN 9V
Plug the supplied power adapter in here.
(9V DC @ 100mA, 2.1mm connector, centre
positive)
WARNING!
Do not use an adapter with a voltage output of more
than 9V. The PRO SOLO must not share an adapter
with any other device. Failure to observe this will quite
possibly damage the PRO SOLO, other device and
and/or the power supply; and
will invalidate your
warranty.
