10
Using the LFO
The PRO SOLO Mk3 has its own internal LFO (low frequency oscillator), which can be used to
modulate the CV and/or Aux 1 outputs. The amount of LFO that is sent to each of these
destinations can be controlled independently, and is assignable to a variety of Controllers. By
default, the LFO is routed to the CV output, providing a vibrato effect when the modulation
wheel (CC 1) is turned up.
The rate of the LFO is adjustable from approximately 0.1Hz to 100Hz, and can also be
synchronised to incoming MIDI clock with a variable divide ratio. Various waveshapes are
available, including triangle, sawtooth, several widths of pulse, as well as a pseudo-random
sample-and-hold. The LFO can either be free running or can be reset to a user-specified point
in the waveform on key-on.
For a thorough explanation of all of the parameters and values associated with the LFO, please
see pages 21 & 22.
