18
Parameter List
–
Aux 1 (contd.)
P25
LFO to Aux 1 Controller
(default: 17)
0 to 119
CCs 0 to 119
[Aft]
Aftertouch
[VEL]
Velocity
[Pbd]
Pitch Bend
[off]
Off
Sets which MIDI message will control the amount of LFO modulation output on Aux 1.
P26
LFO to Aux 1 Minimum Value
(default: 0)
Range: 0 to 127
Sets the level for LFO to Aux 1 modulation when the controller is at its minimum value, allowing for a
base level of modulation to be applied at all times.
P27
LFO to Aux 1 Maximum Value
(default: 64)
Range: 0 to 127
Sets the level for LFO to Aux 1 modulation when the controller is at its maximum value.
Tip: Swap the minimum and maximum values if you need the controller to work backwards.
P28
LFO to Aux 1 Reset Value
(default: 0)
Range: 0 to 127
Sets the amount of LFO to Aux 1 modulation that the PRO SOLO Mk3 will reset to at power-on, upon
receiving a MIDI Controller Reset command or a new setup being loaded from memory. Use this if you
want a pre-set amount of modulation that can later be turned off using the chosen controller. This is
equivalent to a MIDI message of this value being received, so it will be influenced by the minimum and
maximum settings above.
P29
Aux 1
Drum Trigger Note
(default: 60)
Range: 0 to 127
Sets which note Aux 1 will respond to if controller is set to Drum Trigger.
