O p e r a t i n g I n s t r u c t i o n s
|
KBL Tower pureEnergy
49
2,5
②
If your tanning device is equipped with
a central exhaust-air module, also undo
the screw
②
that is located centrally at
the top of the door pane.
Þ
Lift the panes out of the guide rails and keep
them in a safe place.
INSTALLING ACRYLIC PANES
After the pane and the tubes (if necessary) have been
cleaned, reinsert the pane into the guide rails and
close the side covering strip.
9.7 Tubes and starters
By regularly cleaning the tubes you can help pre-
serve their tanning power.
• When installing the tubes, make sure that the
tube inscription is visible. If it is installed in
a different position, there will be no tanning
effect.
• After new tubes have been installed, the
operating hours of the tubes must be reset in
the service menu.
WARNING
Injuries and damage due to improper
maintenance
If the maintenance intervals for the UV
lamps are exceeded or incompatible UV
lamps are installed, the share of harmful
UVB radiation may increase. Sunburn
and other skin damage may result.
• Always comply with the specifi ed
maintenance intervals, see chapter
maintenance intervals / maintenance
plan.
• Follow the cleaning / disinfection
instructions.
Improper maintenance can cause the tan-
ning device to be damaged or to become
unusable.
Summary of Contents for Tower pureEnergy
Page 1: ...OPERATING INSTRUCTIONS TANNING DEVICE ...
Page 59: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 60 Remarks ...
Page 61: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 62 Remarks ...
Page 62: ...Ringstraße 24 26 56307 Dernbach Germany fon 49 0 26 89 94 26 0 fax 49 0 26 89 94 26 66 ...