O p e r a t i n g I n s t r u c t i o n s
|
KBL Tower pureEnergy
19
3.3 Exhaust air modes
Danger of overheating
Under no circumstances the ceiling fan
shall be connected to anything!
• Free
and
unobstructed
airfl ow
required.
• Do not connect any air duct or vent to
the ceiling fan.
Exhaust air system
STANDARD MODE
In the standard operating mode (circulating-air), ven-
tilation takes place exclusively via the ceiling fan
⑪
.
• Operating the tanning device in standard mode is
only permitted in rooms with adequate ventilation.
• Please take note of the information on and ensure
minimum room hight (
technical data
).
⑪
CONNECTED TO EXTERNAL EXHAUST AIR
SYSTEM
Danger of overheating by use of non-
original parts for exhaust connection.
The tanning device may only be connected to an
external exhaust air system, air duct or vent, by
using the original KBL central exhaust air module
⑫
(mounted to the back of the tanning device) option-
ally available.
• At ALL TIMES,
a free
and unobstructed air fl ow of
the ceiling fan
⑪
must be ensured to avoid over-
heating and damage to the tanning device!
Exhaust air system
⑪
⑫
⑫
Central exhaust air module (optional)
⑫
Summary of Contents for Tower pureEnergy
Page 1: ...OPERATING INSTRUCTIONS TANNING DEVICE ...
Page 59: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 60 Remarks ...
Page 61: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 62 Remarks ...
Page 62: ...Ringstraße 24 26 56307 Dernbach Germany fon 49 0 26 89 94 26 0 fax 49 0 26 89 94 26 66 ...