O p e r a t i n g I n s t r u c t i o n s
|
KBL Tower pureEnergy
37
INFORMATION ABOUT OPERATION
④
Select the menu item
Operation-Info
to display
the working hours of the tanning system (
WORK
),
the operating hours of the tubes (
TUBE
) as well as
temperature information.
DISPLAYING THE OPERATING HOURS OF THE
SOLARIUM
④⑤
The menu item
xxxxxh WORK
is used to display
the operating hours of the tanning unit.
• Invoke the display of the operating hours (xxxxxh
WORK)
by pressing 0 (minus button) or 5 (plus
button).
• Press STOP to exit the menu.
DISPLAYING THE OPERATING HOURS OF THE
TUBES
④⑤
The menu item
xxxxxh TUBE
is used to display the
operating hours of the solarium’s tubes.
• Invoke the display of the operating hours of the
tubes (xxxxxh
TUBE)
by pressing 0 (minus button)
or 5 (plus button).
• Press STOP to exit the menu.
TEMPERATURE DISPLAY A/B
④⑤
The temperature displays A and B indicate the
measured values of internal sensors.
Press 0 (minus button) or 5 (plus button) to invoke the
displays
Temp.A
and
Temp.B
.
RESETTING THE OPERATING HOURS OF THE
TUBES (KBL4/KBL5)
④⑤
Use the menu item
CPI RESET (KBL4)
to reset the
operating hours of the tubes to zero for inductive and
CPI-equipped units. These tube hours must be reset
after each replacement of tubes.
• Invoke the
PIN II
menu and enter the PIN.
• Press 5 (plus button) or 0 (minus button) to select
CPI
.
• Press START to open
CPI RESET
.
• Keep 1 (plus button) pressed as long as necessary
to set the hours to zero.
• Press START to save the settings, then exit the
menu using the STOP button.
Use the menu item
RESET h TUBE
(KBL5) to reset
the operating hours of the tubes to zero. These tube
hours must be reset after each replacement of tubes.
• Press 5 (plus button) or 0 (minus button) to select
RESET h TUBE
.
• Keep 1 (plus button) pressed as long as necessary
to set the hours to zero.
• Press START to save the settings, then exit the
menu using the STOP button.
SETTING THE TIMER FUNCTION OF THE DECO-
RATIVE LIGHTING
④
The menu item
TIME/DATE
allows you to enter two
pairs of times per day at which the decorative lighting
is automatically switched on and off (e.g. Monday at
10:00 h on, at 12:00 h off, at 13.00 h on again, and
at 22:00 h off, Tuesday at 11:00 h on, at 22:00 h off,
etc.). If a switching time is not required, it can be
deleted by pressing 1.
• Invoke the
TIMER
menu.
• Select the days of the week with START and then
KBL5 and KBL4
processors use different software variants! The KBL5 menu only contains a subset of the setting
options available in the KBL4 menu. The order of the following information refers to the KBL4 menu. KBL4 menu
items are labelled
④
. Items pertaining to the KBL5 menu are additionally marked
⑤
.
8.8 Settings on service level I
Summary of Contents for Tower pureEnergy
Page 1: ...OPERATING INSTRUCTIONS TANNING DEVICE ...
Page 59: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 60 Remarks ...
Page 61: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 62 Remarks ...
Page 62: ...Ringstraße 24 26 56307 Dernbach Germany fon 49 0 26 89 94 26 0 fax 49 0 26 89 94 26 66 ...