O p e r a t i n g I n s t r u c t i o n s |
KBL Tower pureEnergy
46
Part
Application
Cleaning and disinfection activities
Interval
①
Handles
Directly on the
surface
Clean these parts with single-pass paper towels. Use
only EPA registered quaternary ammonium germi-
cidal based detergent solution (follow product label for
use-dilution), such as Lucasol One Step, to clean and
disinfect the tanning device and its components.
For thorough cleaning and disinfection, the product
must be allowed to remain in contact with the surface
being cleaned and disinfected for a specifi ed amount
of time. This specifi ed amount of time depends on the
cleaner/ disinfectant which is used. Follow the direc-
tions for use of the cleaner/disinfectant. After this speci-
fi ed application time remove remaining cleaner/disinfec-
tant from the surfaces of the tanning device.
After each tanning session
②
Control panel
③
Acrylic panes
Directly on the
surface
④
Protective goggle
⑤
Floor plate
Directly on the
surface
⑥
Plastic surface of the
door
Clean with a damp chamois and a cleaning agent for
acrylic plastic (antistatic). Prevent the corners and edg-
es from getting wet. Never clean with a dry cloth.
When required
Tubes
Remove tubes and clean them with a damp chamois.
200 operating hours
Other plastic surfaces
and varnished surfaces
Clean with a damp soapy cloth. Never clean with a dry
cloth.
When required
①
②
③
④
⑤
⑥
CLEANING AND DISINFECTION PLAN
Summary of Contents for Tower pureEnergy
Page 1: ...OPERATING INSTRUCTIONS TANNING DEVICE ...
Page 59: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 60 Remarks ...
Page 61: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 62 Remarks ...
Page 62: ...Ringstraße 24 26 56307 Dernbach Germany fon 49 0 26 89 94 26 0 fax 49 0 26 89 94 26 66 ...