O p e r a t i n g I n s t r u c t i o n s
|
KBL Tower pureEnergy
41
QUERYING SOFTWARE INFORMATION
④
Select the menu item
PIN II/VERSION
to display
the name and number of the installed software
version. This information is also displayed for approx.
2 seconds after the unit has been switched on.
• Invoke the
PIN II
menu and enter the PIN.
• Press 5 (plus button) or 0 (minus button) to select
VERSION
.
• Press START to display the version information.
SETTING THE EASYCARE UNIT
④
The menu items concerning easyCare are only
displayed if the tanning system is equipped with an
easyCare unit. For information other than the menu
setting, please refer to the easyCare manual.
DEFAULT SESSION TIME EASYCARE
The session time set here is used whenever
easyCare
is
activated
without
allowing
for
making settings via the easyCare display itself
(T.Display = OFF).
• Invoke the
PIN II
menu.
• Press 5 (plus button) or 0 (minus button) to select
easyCare
.
• Open the submenu by pressing START and then
select
EC.TIME
using 5 (plus button) or 0 (minus
button).
• Enter a duration of time between 8 and 20 minutes.
• Press START to save the settings and STOP to exit
the menu.
DISPLAY OF THE ERYTHEMA-EFFECTIVE
IRRADIANCE
This value is given for information only.
• Invoke the
PIN II
menu.
• Press 5 (plus button) or 0 (minus button) to select
easyCare
.
• Press START to open the submenu and select
EerLi
or
EerDe
using 5 (plus button) or 0 (minus button).
• Exit the menu by pressing STOP.
TANNING CONTROL ONLY VIA EASYCARE
You can determine whether easyCare can be
deactivated or not.
• Invoke the
PIN II
menu.
• Select
easyCare
by pressing 5 (plus button) or 0
(minus button).
• Press the START button to open the submenu and
select
EConly
using 5 (plus button) or 0 (minus
button).
• Select the desired setting by pressing 4 (plus
button) or 9 (minus button). ON=easyCare cannot
be deactivated, OFF=easyCare can be deactivated.
• Press START to save the settings and leave the
menu by pressing STOP.
SETTING OF SESSION TIME AT EASYCARE UNIT
POSSIBLE
Here you can determine whether it will be possible to
set the session time via the easyCare display.
• Invoke the
PIN II
menu.
• Select
easyCare
by pressing 5 (plus button) or 0
(minus button).
• Press START to open the submenu and select
T.Display
by pressing 5 (plus button) or 0 (minus
button).
• Select the desired setting by pressing 4 (plus
button) or 9 (minus button). ON=setting via display
possible, OFF=setting via display impossible.
• Save the settings by pressing START and exit the
menu via STOP.
SENSOR TEST
The sensor test is carried out to check whether the
sensor is functional.
• Invoke the
PIN II
menu.
• Select
easyCare
by pressing 5 (plus button) or 0
(minus button).
• Press START to go to the submenu and select
TEST
by pressing 5 (plus button) or 0 (minus button).
• Press the sensor onto the skin in order to start the
test.
• Press STOP to leave the menu.
RELAY TEST
Summary of Contents for Tower pureEnergy
Page 1: ...OPERATING INSTRUCTIONS TANNING DEVICE ...
Page 59: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 60 Remarks ...
Page 61: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 62 Remarks ...
Page 62: ...Ringstraße 24 26 56307 Dernbach Germany fon 49 0 26 89 94 26 0 fax 49 0 26 89 94 26 66 ...