O p e r a t i n g I n s t r u c t i o n s |
KBL Tower pureEnergy
21
power supply cord.
A Class-A ground fault circuit interrupter (GFCI) has
to be used for Canada. Should the operation of the
tanning device cause any interference in the power
supply network, e.g. with ripple-control systems
(TRA), consult your power supply company to have
corresponding blocking elements (audio frequency
suppressors) installed.
GND
WIRING FOR 3-PHASE OPERATION
1
2
K1.1
K1.3
K1.5
gnd
L1(R)
L2(S)
L3(T)
L3
L2
L1
PE
B
C
D
7
6
5
4
9
8
3
set jumper settings
Mains 3 x 220 V / 60 Hz
4.4 Connecting an external
audio source
The cinch marked in the illustration is connected to
the external audio source where the line-out of the
sound player or the headphone/loudspeaker jack are
available for connection.
4.5 Level adjustment studio
music signal
The voice / audio system components are installed in
the back part of the tanning device. Level adjustment
is carried out via a potentiometer
①
that is located
on the audio switch circuit board.
①
To avoid overdrive, select the level adjustment
accordingly. The level setting depends on the strength
of the external signal and should be carried out by
qualifi ed, trained and authorized service technicians.
4.6 Operation using different
audio sources
The audio source can be changed via the interior
control panel.
The tanning device can be operated using the
following audio sources:
INTERNAL MP3 PLAYER
When using the internal MP3 player, you can either
play the music tracks that are originally supplied on
the SD card, or you can record your own tracks to
the SD card.
Summary of Contents for Tower pureEnergy
Page 1: ...OPERATING INSTRUCTIONS TANNING DEVICE ...
Page 59: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 60 Remarks ...
Page 61: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 62 Remarks ...
Page 62: ...Ringstraße 24 26 56307 Dernbach Germany fon 49 0 26 89 94 26 0 fax 49 0 26 89 94 26 66 ...