O p e r a t i n g I n s t r u c t i o n s
|
KBL Tower pureEnergy
31
is selected. If
Wellness
or
Pop
has been selected as
the default audio source, one title is randomly chosen
from the directory and played after the unit has been
turned on. After that, the following tracks are played
one after the other.
Indicates that a selection of various
audio sources is available. When
making your choice, the selected
source is being displayed for a short
time.
WELLNESS
Indicates that you have selected the
Wellness
tracks.
POP
Indicates that you have selected the
Pop
tracks.
STUDIO
Indicates that you have selected the
external audio source.
The available audio sources are defi ned via AUDIO/
WPS in the service menu.
The default source is determined via AUDIO/
PRESEL in the service menu.
In order to choose an audio source, proceed as
follows:
• Press
to invoke display 2.
• Press the plus or minus button of the display as
often as necessary until the desired audio source
is displayed.
SELECTING THE AUDIO TRACK AND CHANNEL
When you switch over from
Wellness
or
Pop
to
Studio
Music
, the player remembers the title being played at
that time and restarts playing it after switching back.
This symbol means “next track” in
Wellness
or
Pop
mode and “next channel”
with the studio music option.
In order to choose a track or a channel, proceed as
follows:
• Press the plus button above the symbol to jump to
the following title/channel.
• Press the minus button below the symbol to jump
to the previous title/channel.
AQUACOOL (OPTIONAL FEATURE)
On
Off
aquaCool canister is empty
The initial value (
on
or
off
) is set via AAC/AQUA/
AQUA in the service menu. The cycle time is
defi ned via the menu item AAC/AQUA/Cycle in the
service menu.
This section only applies to tanning units equipped
with aquaCool. Here you can switch the aquaCool
spraying on (plus
button, symbol fl ashing) or off
(minus button, symbol not fl ashing). aquaCool is
started in accordance with the settings made in the
service menu. An ongoing spraying process cannot
be stopped.
• If the system is running short of aquaCool liquid,
the message “Aqua low” is displayed between
sessions. After the fi rst message, there is suffi cient
aquaCool left for approx. 2.5 hours of operation
with aquaCool (depending on the preset cycle
time; 2.5 operating hours if cycle time = 1 min).
• If the system has run out of aquaCool liquid, the
message “Aqua 0 %” appears and the symbol is
crossed out. If you wish to continue to operate
the unit without aquaCool, you can switch off the
messages and the symbol. To do so, go to the
service menu and deactivate the submenu AQ of
PIN II.
MEGAVOICE ON/OFF (OPTIONAL FEATURE)
On
Off
The initial value (
on
or
off
) is set via BACKTAN/
PRESEL in the service menu.
To switch megaVoice on or off, proceed as follows:
• Press
to invoke display 3.
• Press the plus or minus button above or below /
to set the desired value.
Summary of Contents for Tower pureEnergy
Page 1: ...OPERATING INSTRUCTIONS TANNING DEVICE ...
Page 59: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 60 Remarks ...
Page 61: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 62 Remarks ...
Page 62: ...Ringstraße 24 26 56307 Dernbach Germany fon 49 0 26 89 94 26 0 fax 49 0 26 89 94 26 66 ...