O p e r a t i n g I n s t r u c t i o n s
|
KBL Tower pureEnergy
40
BASIC SETTINGS AUDIO SYSTEM
④⑤
The menu item
PIN II/CM
is used to make basic
settings for the audio system.
• Invoke the
PIN II
menu and enter the PIN.
• Set the desired value by pressing the plus and
minus buttons to the corresponding letter.
• Save the settings by pressing START, press STOP
to leave the menu.
C (Channel) is deactivated if only external channel
selection with exactly one channel is available for the
unit. The channel-selection symbol is not displayed.
M (Music) is deactivated in case there is no audio
system available. No symbols regarding the audio
system are displayed.
SETTING THE OPERATING HOURS OF THE
TUBES
④
Go to the menu item
PIN II/CM
if you want to enter
the operating hours of the tubes.
• Invoke the
PIN II
menu and enter the PIN.
• Press START to invoke
RÖHRENSTUNDEN
EINSTELLEN (SET OPERATING HOURS OF
TUBES)
.
• Enter the desired value by pressing 5 (plus button)
and 0 (minus button).
• Save the settings by pressing START and exit the
menu using the STOP button.
DOWNLOAD INFORMATION
④
The menu items
PIN II/la.Download
and
PIN
II/fi.Download
indicate time and date of the lat-
est (
la.Download)
or of the fi rst (
fi.Download)
software download.
• Invoke the
PIN II
menu and enter the PIN.
• Select
la.Download
or
fi.Download
by
pressing 5 (plus button) or 0 (minus button).
• Press the START button to display the
corresponding information.
BASIC SETTINGS AQUACOOL (ACTIVATING/
DEACTIVATING)
④
The menu item
PIN II/AQ
is used to activate the
aquaCool function (top mark) or to deactivate it
(bottom mark). If the function has been deactivated,
the aquaCool symbol is not displayed, and the studio
customer cannot activate aquaCool.
• Invoke the
PIN II
menu and enter the PIN.
• Select
AQ
using 5 (plus button) or 0 (minus button).
• Activate the function by pressing 4 (plus button)
and deactivate it by pressing 9 (minus button).
• Save the settings by pressing START and exit the
menu by pressing the STOP button.
AQUACOOL TESTS
④
AQUACOOL TEST CYCLE
The menu item
PIN II/TEST/AQUATEST
allows for
starting a spraying cycle to test the spraying function.
• Invoke the
PIN II
menu and enter the PIN.
• Press 5 (plus button) or 0 (minus button) to select
TEST
.
• Press START to select the
AQUATEST
submenu.
Activate the test by pressing START.
AQUACOOL ENDURANCE TEST
Under the menu item
PIN II/TEST/AQUA EXTR.
you can determine whether an aquaCool endurance
test is to be started with the subsequent tanning
session. This test has a cycle time of 5 minutes and
covers the whole of the tanning time.
• Invoke the
PIN II
menu and enter the PIN.
• Press 5 (plus button) or 0 (minus button) to select
TEST
.
• Press the START button to invoke the submenu
and 5 (plus button) or 0 (minus button) to select
AQUA EXTR.
• Select
AQUA EXTR. ON
by pressing 4 (plus button)
or
AQUA EXTR. OFF
by pressing 9 (minus button).
8.9 Settings on service level II
Summary of Contents for Tower pureEnergy
Page 1: ...OPERATING INSTRUCTIONS TANNING DEVICE ...
Page 59: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 60 Remarks ...
Page 61: ...O p e r a t i n g I n s t r u c t i o n s KBL Tower pureEnergy 62 Remarks ...
Page 62: ...Ringstraße 24 26 56307 Dernbach Germany fon 49 0 26 89 94 26 0 fax 49 0 26 89 94 26 66 ...