Kaisai KHC-06RY1, Installation Manual

Page: 132 / 176

CAUTION
Indoors
Power supply
Please use the shielded wire, and the shield layer must be grounded.
On/Off switch
Fuse
Distribution box Distribution box Distribution box Distribution box
Fuse Fuse Fuse
L N
L N L N
L N
Master unit
Slave unit 1
H1 H2
Slave unit 2
H1 H2
Slave unit x
H1 H2
Build-out resistor
Only the last IDU
requires adding the
build-out resistor at
H1 and H2.
......
SW9
Power supply
Please use the shielded wire, and the shield layer must be grounded.
On/Off switch
Fuse
Distribution box Distribution box Distribution box Distribution box
The cascade system electrical control system connection diagram(3N~)
Master unit
Slave unit 1
H1 H2
Slave unit 2
H1 H2
Slave unit x
H1 H2
Build-out resistor
Only the last IDU
requires adding the
build-out resistor at
H1 and H2
......
SW9
L1 L2 L3 N
Fuse
L1 L2 L3 N
Fuse
L1 L2 L3 N
Fuse
L1 L2 L3 N
1
、
The cascade function of the system only supports 6 machines at most.
2
、
In order to ensure the success of automatic addressing, all machines must be connected to the same power
supply and powered on uniformly.
3
、
Only the Master unit can connect the controller, and you must put the SW9 to “on” of the master unit, the slave
unit cannot connect the controller
.
4
、
Please use the shielded wire, and the shield layer must be grounded.
The cascade system electrical control system connection diagram(1N~)
ON
OFF
SW9
Slave unit
Master unit
ON
OFF
SW9
Slave unit
Master unit
132