Kaisai KHC-06RY1, Installation Manual

Page: 97 / 176

3.2 Accessories avaliable from supplier
3 ACCESSORIES
3.1 Accessories supplied with the unit
Before installation
Be sure to confirm the model name and the serial number of the unit.
Handling
Due to relatively large dimensions and heavy weight, the unit should only be handled using lifting tools with slings. The slings
can be fitted into foreseen sleeves at the base frame that are made specifically for this purpose.
4 BEFORE INSTALLATION
In heating mode, the water flowing temperature
(TW_out) range in different outdoor temperature (T4) is
listed below:
In cooling mode, the water flowing temperature
(TW_out) range in different outdoor temperature(T4) is
listed below:
Operation range by heat pump with possible limitation and protection.
Installation and owner’s
manual(this book)
Quantity
Operation manual
Technical data manual
Y-shape filter
Shape Name
1
1
1
1
Installation Fittings
Wired controller
Thermistor for domestic
hot water tank or zone2
water flow or balance tank
1
1
Drian hose
1
Energy label 1
Tighten belt for
customer wiring use
2
3
Network matching
wires
1
In DHW mode, the water flowing temperature(TW_out)
range in different outdoor temperature(T4) is listed below:
-
Thermistor for balance tank(Tbt1) 1
Extension wire for Tbt1 1
Thermistor for Zone 2 flow temp.(Tw2) 1
Extension wire for Tw2 1
Thermistor for solar temp.(Tsolar) 1
Extension wire for Tsolar 1
Thermistor and extension wire for Tbt1, Tw2, Tsolar can
be shared, if these functions are needed at the same time,
and 10m in length of the sensor cable please order these
thermistors and extension wire additionally.
97