KAESER KOMPRESSOREN M170, Service Manual

Page: 101 / 280

Code Meaning Remedy See
chapter
Where can I get help?
Specialised
workshop
KAESER
Service
1412 Open circuit in the inlet
valve pressure sensor.
Have repaired. – – X
1413 Short circuit in the inlet
valve pressure sensor.
Have repaired. – – X
1414 Open circuit in the com‐
pressor unit temperature
sensor.
Have repaired. – – X
1415 Short circuit in the com‐
pressor unit temperature
sensor.
Have repaired. – – X
1416 Open circuit in fuel level
sensor.
Have repaired. – – X
1417 Short circuit in fuel level
sensor.
Have repaired. – – X
1420 Open circuit in the venting
valve (p+e).
Have repaired. – – X
1421 Short circuit in the venting
valve (p+e).
Have repaired. – – X
1422 Open circuit in the auxili‐
ary venting valve (p)
Have repaired. – – X
1423 Short circuit in the auxili‐
ary venting valve (p)
Have repaired. – – X
1424 Open circuit in the inlet
valve control valve (e).
Have repaired. – – X
1425 Short circuit in the inlet
valve control valve (e).
Have repaired. – – X
1426 Open circuit in the frost
protector valve.
Have repaired. – – X
1427 Short circuit in the frost
protector valve.
Have repaired. – – X
1430 Manual-stop automatic
mode.
Unblock. 8.2.6 – –
Have checked. – – X
1450 Controller block, GSM/
GPS monitoring.
Unblock GSM/GPS mod‐
ule.
– – X
1470 Automatic start fault. Have checked. – – X
Tab. 64 General fault messages and measures
9.2.2 Warning message on the controller
The machine will not be shut down.
The «Acknowledge » key flashes. The «Information key » illuminates.
9 Fault Recognition and Rectification
9.2 SIGMA CONTROL MOBIL messages
No.: 9_9425 01 E
Service Manual Screw Compressor
M170 SIGMA CONTROL MOBIL
89