![background image](http://html1.mh-extra.com/html/kaeser-kompressoren/m170/m170_service-manual_3188024171.webp)
Additional precautions for a very dirty machine
The machine can become very dirty after prolonged use on a construction site. A machine in such
condition is not suitable for towing on public roads.
1. Clean the machine, particularly the chassis and running gear.
2. Check the function of wheels, brakes, lights and signaling equipment.
Malfunctions: Correct any defects before towing.
Additional precautions for conditions of snow and ice
Considerable snow or ice may build up on the machine under low temperature conditions.
CAUTION
Accident hazard due to snow or ice falling off the machine.
Snow or ice falling from the towed machine can endanger following vehicles.
Problems with driving dynamics and damage to the machine could occur.
The maximum permissible axle load could be exceeded.
➤ Do not tow the machine if it is covered by snow or ice.
➤ Remove any snow or ice before towing.
Observe / carry out the following before towing:
1. Make sure the towing hitch is compatible with the ball or eye coupling on the towed machine.
2. Check that the machine is shut down and secured against accidental restarting.
3. Detach all connecting lines and hoses.
4. Make sure there are no unsecured tools lying on or in the machine.
5. Close and lock the access doors.
Adjust the towbar to suit the height of the towing vehicle hitch.
When the machine is coupled up, the towbar must be parallel with the ground.
Fig. 84 Towing alignment
12 Decommissioning, Storage and Transport
12.2 Transport
No.: 9_9425 01 E
Service Manual Screw Compressor
M170 SIGMA CONTROL MOBIL
159
Option sa