Fitting the overrun braking mechanism of the non-adjustable towbar:
Fig. 26 Fitting the overrun braking mechanism of the non-adjustable towbar
1
Overrun braking mechanism
2
Towbar
3
Fixing bolt
4
U-washer
5
Hexagon nut (self-locking)
6
Brake transmission lever
7
Brake rod
8
Braking cable bracket (equaliser)
9
Connecting sleeve
10
Hexagon nut (locknut)
1. Push the overrun braking mechanism onto the towbar and position so that the securing bolts can
be pushed on.
2. Push in the securing bolts (using light hammer blows if necessary) and push on U-washers.
3. Secure the bolts with the self-locking nuts (see chapter 2.4.4 for tightening torque).
4. Insert brake actuating rod into the brake cable bracket and screw the connecting sleeve free of
play and tension.
5. Lock the sleeve with the hexagonal nut.
Further information Further information on setting the brake actuating rod is to be found in chapter 10.8.3.3.
6
Installation
6.3
Fitting the towbar
No.: 9_9425 01 E
Service Manual Screw Compressor
M170 SIGMA CONTROL MOBIL
59
Option sd, sh
