Fixed-height chassis (with parking brake):
1. Wind the jockey wheel to its uppermost position.
2. Check that the wheels are securely fitted and the tyres are in good condition.
3. Check the tyre pressures.
4. Connect the cable for the lighting and indicator systems and carry out a function check.
5. Release the parking brake:
(see Fig. 88/b).
■ Pull the brake lever a little further on and press the release button.
■ Hold in the release button and push the lever fully down.
6. Remove the chocks.
Fixed-height chassis (without parking brake):
Fig. 89 Safety sign - secure the chocks
WARNING
Missing chocks
Serious injury or death can result from an unsecured machine rolling away.
➤ Secure the chocks in the transport securing device before transporting the machine.
➤ Replace missing chocks immediately.
1. Wind the jockey wheel to its uppermost position.
2. Check that the wheels are securely fitted and the tyres are in good condition.
3. Check the tyre pressures.
4. Attach the lighting and indicator systems and carry out a function check.
5. Remove the chocks and secure them in the transport securing device.
Replacement chocks can be purchased from KAESER representatives. A list is given at the
end of this manual. The part number of the chock is 5.1325.0.
Ensure emergency braking in the case of breakaway from the towing vehicle:
If the compressor breaks away from the towing vehicle, the cable tightens and pulls on the emergency
brake (parking brake).
It is essential that the breakaway cable is threaded through its guides for correct emergency braking.
12 Decommissioning, Storage and Transport
12.2 Transport
164
Service Manual Screw Compressor
M170 SIGMA CONTROL MOBIL
No.: 9_9425 01 E
Option sd
Option sh
Option sh
Option sa, sd