➤ Hang the following notice on the instrument panel informing of the decommissioning measure‐
ments taken.
Attention!
1. The machine is decommissioned.
2. It is filled with preserving oil.
3. For recommissioning:
■ Take measures for recommissioning after a long period of storage.
■ Recommission according to service manual.
Date / signature
Tab. 89 Text for the long-term decommissioned information notice
➤ Store in a dry place with even temperature.
12.2 Transport
Precondition Machine switched off and locked off
(«battery isolating switch »off)
The machine is fully vented, the pressure gauge reads 0 bar.
Machine is cooled down.
All consumer hoses disconnected, all other lines and hoses disconnected and removed.
Any loose or movable parts that may fall when transporting, removed or secured.
Allow transportation only by personnel trained in safe dealing with motor vehicles and the transporting
of goods.
WARNING
There is danger of being run over or crushed by an overturning vehicle.
Death or serious injury can result from being crushed or run-over by a machine under tow.
➤ Riding on the machine while it is under tow is strictly forbidden.
➤ Make sure the danger area is clear of personnel.
12.2.1 Towing the compressor on the road
Machines with appropriate chassis versions and running gear are approved for towing on public roads.
The machine is designed for a maximum towing speed of 100 km/h. National and local regulations
must be observed when towing the machine on public highways.
➤ Observe the safety instructions in chapter 3.5.2 "Safe machine operation".
12.2.1.1 Preparing for transport
Stowing payload:
Do not exceed the permissible loading (overall weight, coupling load, axle load).
Observe national traffic laws. If additional loading is not permitted, the load must be transported in
the towing vehicle.
1. Check that loading the machine with tools or accessories during transport is permissible.
2. Place additional loads only in the spaces provided and secure carefully.
12 Decommissioning, Storage and Transport
12.2 Transport
158
Service Manual Screw Compressor
M170 SIGMA CONTROL MOBIL
No.: 9_9425 01 E
