10.3.2 Maintenance tasks after commissioning
The table below lists maintenance tasks required after commissioning (initial start-up).
➤ Perform maintenance tasks according to the following schedule.
Component:
Task
After the first 10 h
After the first 50 h
See chapter
Note
Engine:
Check belt tension and re-ten‐
sion if necessary.
X
Engine
SM
Check coolant level.
X
Engine
SM
Wheels/chassis:
Re-tighten the wheel nuts/bolts.
X
h = operating hours; Engine SM = engine manufacturer's service manual
Tab. 79 Maintenance tasks after commissioning
10.3.3 Regular maintenance tasks
The following table lists the various maintenance intervals.
Maintenance interval
Short description
Daily
–
Every 250 h, at least annually.
A250
Every 500 h, at least annually.
A500
Every 1000 h, at least annually.
A1000
Every 1500 h, at least annually.
A1500
Every 2000 h, at least every 2 years.
A2000
Every 3000 operating hours
A3000
Every 6000 operating hours
A6000
Every 36,000 h, at least every 6 years.
A36000
Tab. 80 Maintenance intervals and regular maintenance tasks
The table below lists regular maintenance tasks.
➤ Carry out maintenance tasks punctually taking ambient and operating conditions into consider‐
ation.
10 Maintenance
10.3 Maintenance schedules
98
Service Manual Screw Compressor
M170 SIGMA CONTROL MOBIL
No.: 9_9425 01 E