K-sun BEE3, Owner'S Manual

Page: 3 / 132

Introduction
Thank you for purchasing LABELShop
£
BEE3.
This manual is divided into four sections:
1. Getting Started
2. Basic Operations 1
3. Basic Operations 2
4. Additional Functions
Please read this manual before using your LABELShop
£
BEE3.
This manual contains CAUTION and WARNING notices which must be observed
and tips that can assist you complete the task more easily and more effectively.
Be sure to keep this manual handy for future references.
All rights reserved. No part of this manual may be reproduced, stored in a retrieval system,
or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without our prior written permission.
The contents of this manual are subject to change without notice.
All effort s have been made to ensure the accuracy of the contents of this manual.
However, should any errors be detected, we would greatly appreciate being informed of
them.
x
Texts you have entered are temporary saved in this device, but not kept for extended
period of time. We shall not be liable for damages, losses, costs, or expenses incurred as
a result of malfunction, repair, test, or battery exhaustion of this device.
x
About the labels
Before attaching labels, be sure to check the purpose of use and the material of the
adhered surface. Depending on the material, environmental conditions, etc., following
problems may occur.
-Color of the labels changes
-Labels come off
-Texts on the label wear off
-Cannot peel off the labels
-Glue remains on the adhered surface
-The adhered surface absorbs the color of the label
-The adhered surface is damaged
We shall not be liable for any damages, losses, costs, or expenses arising from these
problems.
x
Do not carry out any operations not described in this manual, or LABELShop
£
BEE3
may break or cause injury.