K-sun BEE3, Owner'S Manual

Page: 31 / 132

Getting Started
27
x
Use AA alkaline batteries only. Other types of battery have short lives, and the message
to notify the user that the battery is running out may not be displayed.
x
The batteries are used for storing files, text data you entered on the
LABELShop
£
BEE3. Even though you can print only with the battery power, it will
shorten the battery life. To minimize the battery consumption, always use the AC adapter
or the optional Truck/Auto adapter (LSTA-3B) whenever using the LABELShop
£
BEE3.
x
You can print labels with batteries installed, however, it is strongly recommended that you
connect
either adapter before printing.
x
Be sure to replace the batteries with the power turned off to avoid the stored data on the
LABELShop
£
BEE3 from being deleted. Also, do not keep the LABELShop
£
BEE3
without the batteries for more than four minutes. Otherwise all of the text data or settings
you entered or saved may be cleared.
x
Make sure to use the AC adapter only.
x
Print speed becomes slower when the AC adapter is not connected.
x
Printing on the wide tape will temporarily cause the device to consume a large amount of
current, and can cause the device to display "Change Batteries" even if new batteries are
installed. This is normal operation for the device.
x
Print speed becomes slower when the batteries are running low, then "Change Batteries"
appears on the display. Replace all the batteries with new ones or connect the AC
adapter immediately, otherwise the LABELShop
£
BEE3 may turn off in the middle of the
operation or during printing.
x
New AA alkaline batteries will supply enough power for the device to print on one tape
cartridge (0.7" x 26') at room temperatures. However, when you operate the device in
cold places or print on wide tapes, the life span of the batteries becomes shorter. You are
recommended to use the AC adapter as much as possible. Do not use an AC
adapter other than the
one designed for this printer .
x
Make sure to turn off the power after use.
x
If your LABELShop
£
BEE3 is not to be used for long periods, remove the batteries from
the device to avoid possible leakage.
x
Dispose of the used batteries according to your local regulations.